Are you unable to enjoy a seamless internet connection on your client device due to the Linksys extender not broadcasting SSID issue? Well, that is not good. To troubleshoot the issue, you ought to read the solutions mentioned discussed in this article. But, prior to that, verify two things. First, ensure that you have successfully set up your Linksys wireless range extender by referring to the user manual. For example, if you are using the RE6300 extender, then you should read the steps given in the Linksys RE6300 manual. Second, you are trying to the right network.
In case both these things are in check and still you are experiencing the Linksys extender not broadcasting SSID issue, then you ought to continue reading this guide or post.
Linksys Extender Not Broadcasting SSID Issue [Fixed]
1. Change the Connection Source
The primary reason why the Linksys extender not broadcasting SSID issue is troubling you is because the connection source which is used by you is not appropriate. In simple words, you have made the mistake of connecting your networking devices or range extender and router with the aid of a wireless source or medium.
One cannot rely on a wireless source every time. This is the reason why it is suggested that you use an Ethernet cable to connect the networking devices. Make sure that the cable is damage-free. Also, the connection should not be loose from any point.
To ensure that the connection is finger-tight, see if you hear the click sound after plugging the Ethernet cable into the ports located on the devices. This is a huge signal that the cable has been tightly inserted into the extender and the host router.
2. Use the Other Electrical Socket
Another reason why your Linksys range extender is not in the mood to broadcast SSID or network name is that it is not receiving a proper power supply from its wall socket. This could be because the wall socket is short-circuited. Did you have a power outage in your area? Yes? Well then, this justifies the reason behind an improper power supply.
To ensure that proper power is being supplied to you, you ought to bear certain parameters in mind. Taking this into consideration, you can either get your existing wall socket repaired or plug your networking device into another one.
In case you choose the first option, then it is recommended that you call up an electrician at your house. By any chance, he says that the electrical socket which you are trying to get fixed is beyond repair, you ought to opt for the other option.
3. Restart the Linksys WiFi Extender
Technical glitches can also cause the Linksys range extender not broadcasting SSID issue for you by the way. The topmost way that can be used to say goodbye to them is giving it a fresh start to turn into a new leaflet. For this, playing with the button names power is very much required from your end. Thus, do as necessary.
To take care of the problem with care, walking through the instructions in the same order as they are written is quite necessary. In case you need to gain more knowledge regarding the same, then you ought to refer to the user manual.
For your information, if you have a Linksys router at home, then you can become aware of its specifications by referring to the manual that came along with it. Along with that, you will also learn things about linksyssmartwifi, firmware updates, and much more.
The Bottom Line
Troubleshooting the Linksys extender not broadcasting SSID issue is not that hard. But, users still manage to go nuts when it comes to resolving it. Now, you have read the troubleshooting tips mentioned above, we are sure that you will be able to the put the issue at hand to rest considering you have been its victim too. However, in case there is even one percent of chance that it is still troubling you, resetting the device can be of great help. You will be able to reset the device using an oil pin. Done? Good. Now is the time for you to configure it from the very beginning.
