A WiFi range extender takes in the input signals from the host router or the DSL gateway and extends it further and widens the WiFi coverage. Are you unable to connect the Linksys WiFi extender to the host router? Fret not! We can help you out. This article will help you know how to connect Linksys Wifi extender to the router by resolving the issues that are stopping you from getting the job done easily. Go on reading ahead.
Linksys Extender Can’t Connect to Router: Fixed
The effective solutions mentioned in this section will help you get the extender connected to the router thereby extending its signals further.
1. Place the Devices Near Each Other
You ought to keep the Linksys WiFi extender closer to the host router so that the devices can communicate smoothly. Looks like you have placed them at a distance and hence they can’t connect to each other. Pull the devices closer now and plug them in here. Now, let them get connected without any issues.
2. USe A LAN Cable
If the devices are unable to connect via a wireless medium, then we recommend you using a LAN cable now. Cabled connections are always reliable and there are no signal disconnections in this way. All you need to do is get hold of a good LAN cbale and insert one of its ends in to the LAN port of the router and the other end into the Internet port of the extender. The devices should connect now without giving you any trouble.
3. Replace the Cbale
Under any circumstances, if you have connected the devices using a LAN cable already, then check the cable’s entire length thoroughly. It shouldn’t be damaged from anywhere. If it has cuts on it and it is worn out, then use a new cable right away. Also, check that the right ports are put to use to make the connection.
4. Use Alternatvie Wall Outlet
If the devices are not getting connected then there is a possibility that they do not receive a proper power supply. The Linksys WiFI extender and the host router must be fully booted up so that they can easily connect. We recommend you examine the power cables and the power outlets into which the cables are plugged. None should be damaged or loose. Use alternative wall outlets I the current ones are damaged or not working properly.
5. Perform a Power Cycle
Powering off the devices for some time helps you get rid of any technical glitches that might be stopping you from connecting the Linksys extender to the router. This process is known as the power cycle process.
Turn off the Linksys extender and the host router. Take their power cables out from the respective wall outlets. Let the devices sit idle for some time. After waiting for a sufficient amount of time, power on the devices once again.
Try to connect the Linksys WiFi extender with the host router now using a LAN cable to make a wireless connection.
Reset the Linksys Extender
Are you still not able to connect the Linksys extender and the router? You should reset the extender now. This erases the current configuration settings from it. To reset the extender, press the Reset button located on the extender using a sharp and pointed object. You should hold the button for some time. Release the button and the extender will be reset to the factory settings.
You should now perform the Linksys extender setup from the very beginning. Connect it to the router and follow the setup instructions on the extender setup page on a browser.
The Final Note
This wraps up our troubleshooting post on how to fix the connectivity issue between the Linksys WiFi extender and the router. Now that you have connected the devices and performed the setup, you can connect the client devices in your home to the extender’s WiFi. There won’t be any WiFI dead spots now as the extender will help you to widen the network coverage to the area where you never had WiFi earlier.
